==================== sphinxcontrib-apidoc

.. image:: https://github.com/sphinx-contrib/apidoc/actions/workflows/ci.yaml/badge.svg :target: https://github.com/sphinx-contrib/apidoc/actions/workflows/ci.yaml :alt: Build Status

A Sphinx extension for running sphinx-apidoc_ on each build.

Overview

sphinx-apidoc is a tool for automatic generation of Sphinx sources that, using the autodoc <sphinx_autodoc>_ extension, documents a whole package in the style of other automatic API documentation tools. sphinx-apidoc does not actually build documentation - rather it simply generates it. As a result, it must be run before sphinx-build. This generally results in tox.ini files like the following:

.. code-block:: ini

[testenv:docs]
commands =
  sphinx-apidoc -o doc/api my_code my_code/tests
  sphinx-build -W -b html doc doc/_build/html

This extension eliminates the need to keep that configuration outside Sphinx. Instead, this functionality can be enabled and configured from your documentation's conf.py file, like so:

.. code-block:: python

extensions = [
    'sphinxcontrib.apidoc',
    # ...
]
apidoc_module_dir = '../my_code'
apidoc_output_dir = 'reference'
apidoc_excluded_paths = ['tests']
apidoc_separate_modules = True

Configuration

The apidoc extension uses the following configuration values:

apidoc_module_dir The path to the module to document. This must be a path to a Python package. This path can be a path relative to the documentation source directory or an absolute path.

Required

apidoc_output_dir The output directory. If it does not exist, it is created. This path is relative to the documentation source directory.

Optional, defaults to api.

apidoc_template_dir A directory containing user-defined templates. Template files in this directory that match the default apidoc templates (module.rst_t, package.rst_t, toc.rst_t) will overwrite them. The default templates can be found in site-packages/sphinx/templates/apidoc/. This path is relative to the documentation source directory.

Optional, defaults to 'templates'.

apidoc_excluded_paths An optional list of modules to exclude. These should be paths relative to apidoc_module_dir. fnmatch-style wildcarding is supported.

Optional, defaults to [].

apidoc_separate_modules Put documentation for each module on its own page. Otherwise there will be one page per (sub)package.

Optional, defaults to False.

apidoc_toc_file Filename for a table of contents file. Defaults to modules. If set to False, apidoc will not create a table of contents file.

Optional, defaults to None.

apidoc_module_first When set to True, put module documentation before submodule documentation.

Optional, defaults to False.

apidoc_extra_args Extra arguments which will be passed to sphinx-apidoc. These are placed after flags and before the module name.

Optional, defaults to [].

Migration from pbr

pbr_ has historically included a custom variant of the build_sphinx_ distutils command. This provides, among other things, the ability to generate API documentation as part of build process. Clearly this is not necessary with this extension.

There are two implementations of the API documentation feature in pbr: autodoc_tree and autodoc. To describe the difference, let's explore how one would migrate real-world projects using both features. Your project might use one or both: autodoc_tree is enabled using the autodoc_tree_index_modules setting while autodoc is enabled using the autodoc_index_modules setting, both found in the [pbr] section of setup.cfg.

autodoc_tree

As *autodoc_tree* is based on *sphinx-apidoc*, migration is easy. Lets take
`python-openstackclient`_ as an example, looking at minimal versions of
``setup.cfg`` and ``doc/source/conf.py``:

.. code-block:: ini

   [build_sphinx]
   all_files = 1
   build-dir = doc/build
   source-dir = doc/source

   [pbr]
   autodoc_tree_index_modules = True
   autodoc_tree_excludes =
     setup.py
     openstackclient/volume/v3
     openstackclient/tests/
     openstackclient/tests/*
   api_doc_dir = contributor/api

.. code-block:: python

   extensions = ['']

Once migrated, this would look like so:

.. code-block:: ini

   [build_sphinx]
   all_files = 1
   build-dir = doc/build
   source-dir = doc/source

.. code-block:: python

   extensions = ['sphinxcontrib.apidoc']

   apidoc_module_dir = '../../openstack'
   apidoc_excluded_paths = [
     'volume',
     'tests'
   ]
   apidoc_output_dir = 'contributor/api'

There are a couple of changes here:

#. Configure ``apidoc_module_dir`` in ``conf.py``

   With the *autodoc_tree* feature, API documentation is always generated for
   the directory in which ``setup.cfg`` exists, which is typically the
   top-level directory. With this extension, you must explicitly state which
   directory you wish to build documentation for using the
   ``apidoc_module_dir`` setting. You should configure this to point to your
   actual package rather than the top level directory as this means you don't
   need to worry about skipping unrelated files like ``setup.py``.

#. Configure ``apidoc_excluded_paths`` in ``conf.py``

   The ``apidoc_excluded_paths`` setting in ``conf.py`` works exactly like the
   ``[pbr] autodoc_tree_excludes`` setting in ``setup.cfg``; namely, it's a
   list of fnmatch-style paths describing files and directories to exclude
   relative to the source directory. This means you can use the values from the
   ``[pbr] autodoc_tree_excludes`` setting, though you may need to update
   these if you configured ``apidoc_module_dir`` to point to something other
   than the top-level directory.

#. Configure ``apidoc_output_dir`` in ``conf.py``

   The ``apidoc_output_dir`` setting in ``conf.py`` works exactly like the
   ``[pbr] api_doc_dir`` setting in ``setup.cfg``; namely, it's a path relative
   to the documentation source directory to which all API documentation should
   be written. You can just copy the value from the ``[pbr] api_doc_dir``
   setting.

#. Remove settings from ``setup.cfg``

   Remove the following settings from the ``[pbr]`` section of the
   ``setup.cfg`` file:

   - ``autodoc_tree_index_modules``
   - ``autodoc_tree_excludes``
   - ``api_doc_dir``

   You may also wish to remove the entirety of the ``[build_sphinx]`` section,
   should you wish to build docs using ``sphinx-build`` instead.

Once done, your output should work exactly as before.

autodoc
~~~~~~~

*autodoc* is not based on *sphinx-apidoc*. Fortunately it is possible to
generate something very similar (although not identical!). Let's take
`oslo.privsep`_ as an example, once again looking at minimal versions of
``setup.cfg`` and ``doc/source/conf.py``:

.. code-block:: ini

   [build_sphinx]
   all_files = 1
   build-dir = doc/build
   source-dir = doc/source

   [pbr]
   autodoc_index_modules = True
   api_doc_dir = reference/api
   autodoc_exclude_modules =
     oslo_privsep.tests.*
     oslo_privsep._*

.. code-block:: python

   extensions = ['']

Once migrated, this would look like so:

.. code-block:: ini

   [build_sphinx]
   all_files = 1
   build-dir = doc/build
   source-dir = doc/source

.. code-block:: python

   extensions = ['sphinxcontrib.apidoc']

   apidoc_module_dir = '../../oslo_privsep'
   apidoc_excluded_paths = ['tests', '_*']
   apidoc_output_dir = 'reference/api'
   apidoc_separate_modules = True

Most of the changes necessary are the same as `autodoc_tree`_, with some
exceptions.

#. Configure ``apidoc_module_dir`` in ``conf.py``

   With the *autodoc* feature, API documentation is always generated for
   the directory in which ``setup.cfg`` exists, which is typically the
   top-level directory. With this extension, you must explicitly state which
   directory you wish to build documentation for using the
   ``apidoc_module_dir`` setting. You should configure this to point to your
   actual package rather than the top level directory as this means you don't
   need to worry about skipping unrelated files like ``setup.py``.

#. Configure ``apidoc_excluded_paths`` in ``conf.py``

   The  ``apidoc_excluded_paths`` setting in ``conf.py`` differs from the
   ``[pbr] autodoc_exclude_modules`` setting in ``setup.cfg`` in that the
   former is a list of fnmatch-style **file paths**, while the latter is a list
   of fnmatch-style **module paths**. As a result, you can reuse most of the
   values from the ``[pbr] autodoc_exclude_modules`` setting but you must
   switch from ``x.y`` format to ``x/y``. You may also need to update these
   paths if you configured ``apidoc_module_dir`` to point to something other
   than the top-level directory.

#. Configure ``apidoc_output_dir`` in ``conf.py``

   The ``apidoc_output_dir`` setting in ``conf.py`` works exactly like the
   ``[pbr] api_doc_dir`` setting in ``setup.cfg``; namely, it's a path relative
   to the documentation source directory to which all API documentation should
   be written. You can just copy the value from the ``[pbr] api_doc_dir``
   setting.

#. Configure ``apidoc_separate_modules=True`` in ``conf.py``

   By default, *sphinx-apidoc* generates a document per package while *autodoc*
   generates a document per (sub)module. By setting this attribute to ``True``,
   we ensure the latter behavior is used.

#. Replace references to ``autoindex.rst`` with ``modules.rst``

   The *autodoc* feature generates a list of modules in a file called
   ``autoindex.rst`` located in the output directory. By comparison,
   *sphinx-apidoc* and this extension call this file ``modules.rst``. You must
   update all references to ``autoindex.rst`` with ``modules.rst`` instead. You
   may also wish to configure the ``depth`` option of any ``toctree``\s that
   include this document as ``modules.rst`` is nested.

#. Remove settings from ``setup.cfg``

   Remove the following settings from the ``[pbr]`` section of the
   ``setup.cfg`` file:

   - ``autodoc_index_modules``
   - ``autodoc_exclude_modules``
   - ``api_doc_dir``

   You may also wish to remove the entirety of the ``[build_sphinx]`` section,
   should you wish to build docs using ``sphinx-build`` instead.

Once done, your output should look similar to previously. The main change will
be in the aforementioned ``modules.rst``, which uses a nested layout compared
to the flat layout of the ``autoindex.rst`` file.

Links
-----

- Source: https://github.com/sphinx-contrib/apidoc
- Bugs: https://github.com/sphinx-contrib/apidoc/issues

.. Links

.. _sphinx-apidoc: http://www.sphinx-doc.org/en/stable/man/sphinx-apidoc.html
.. _sphinx_autodoc: http://www.sphinx-doc.org/en/stable/ext/autodoc.html
.. _pbr: https://docs.openstack.org/pbr/
.. _build_sphinx: https://docs.openstack.org/pbr/latest/user/using.html#build-sphinx
.. _python-openstackclient: https://github.com/openstack/python-openstackclient/tree/3.15.0
.. _oslo.privsep: https://github.com/openstack/oslo.privsep/tree/1.28.0